UK-London: electrical machinery, apparatus, equipment and consumables; lighting
Uninterruptable Power Supply (UPS) Maintenance Requirement. The Bank of England requires maintenance for its Uninterruptible Power Supply systems at its sites in the City of London and regional office in Loughton, Essex. Interested parties must be able to provide evidence of experience in maintaining a wide range of UPS systems and related products, including operating software. Knowledge and experience of maintaining equipment from the following manufacturers is highly desirable: MGE, Chloride, ASCO OTTS, Metartec, Socomec, Keysource, AEG and Perkins Generators. The Bank requires a maintenance call out service to both sites within 4 hours, with 24 hours a day coverage, for 365 days a year. Prospective companies will ideally belong to the ECA, NICEIE or similar trade body and be able to demonstrate commitment to energy conservation and the environment. The Bank requires interested companies to register their interest on our tender portal (www.bankofenglandtenders.co.uk), no further information/PQQ will be provided until this interest period closes. CPV: 31000000. ...
UK-Harlow: refuse and waste related services
Waste Management. Refuse and waste related services. Non-hazardous refuse and waste treatment and disposal services. A non clinical waste management contract to cover: collection and disposal of non-clinical waste. Collection and disposal of confidential waste. Collection and disposal of waste oil. Collection and disposal of empty toner cartridges. Provision of compactor. CPV: 90500000, 90513000. ...
UK-Leicester: repair, maintenance and associated services of vehicles and related equipment
Leicester City Council vehicle maintenance services (3053-11). Repair, maintenance and associated services of vehicles and related equipment. Repair and maintenance of plant. Leicester City Council is a unitary authority which provides a wide range of services to the approximately 280 000 citizens of Leicester, including education, social care, environmental services, libraries, culture and leisure, highway maintenance, trading standards, and others. To assist in the provision of these services, the Council operates a fleet of over 950 vehicles and items of plant. Of these, some 600 are standard cars and vans (typically Ford Fiestas, Focuses, Connect vans and Transit vans); a further 100 are passenger transport vehicles (minibuses and "welfare" buses). The remainder of the fleet comprises a diverse range of more specialist vehicles (although many based upon standard chassis) such as road sweepers, gully emptiers, refuse collection vehicles, skip loaders, grounds maintenance and construction plant, and various ancillary items (demountable bodies, trailers, etc.) These vehicles and plant are currently maintained and repaired by a specialist contractor, under contract to the Council. The contract is due to expire at the end of 2011, prior to which it is envisaged that a new contract will have been awarded as an outcome of this procurement exercise. The new contract will largely follow the same form as the current arrangements, the key points of which are: i) The service covers all vehicles and plant (a detailed inventory will be shared with tenderers as part of the tender stage of this exercise). ii) It includes all planned maintenance, all repairs (including following accident damage), and MoT testing. All parts and labour are included in the contract, which is based upon fixed charges for specific operations (e.g. routine periodic servicing) and scales of rates for other activities. Recovery of broken-down vehicles from within the city area is also required. iii) The service will be provided principally using the premises and facilities made available by the Council. This consists of a large, modern, easily accessible facility located in the Beaumont Leys area of the city. The contractor will occupy the premises under licence, effectively free of charge. At the tender stage of the process, bidders will have an opportunity to inspect these facilities. iv) The current contractor employs a small number of specialist and skilled staff to deliver the services; these individuals are mainly engaged full-time on the Leicester City Council contract, and it is likely therefore that they will be eligible to transfer to the employment of any new contractor, under the provisions of Transfer of undertakings (Protection of employment) Regulations 2006. More information on this matter, including detailed workforce data, will be provided at the tender stage of the exercise. v) Within the procurement process, potential service providers will be invited to set out how they will work with the Council to maximise, over time, efficiencies and improvements in the way services are delivered. vi) A 5 year contract will be awarded, commencing 1.1.2012. This 5-year term is subject to satisfactory performance by the contractor, and may be extended by the council by up to 2 further years. CPV: 50100000, 45259000. ...
PL-Warsaw: liner-hanger services
Connexio. Marathon Petroleum Poland Services Sp. z o.o. would like to inform you of a qualification system. The main purpose is in connection with the following measure: Liner hanger. Provide liner hanger and services for Marathon's upcoming drilling program. Vendor will be responsible for providing equipment, personnel, and technical support for a setting a 7-5/8" 39 ppf liner hanger in 9-5/8" 40 ppf casing. Setting depth is approximately 2 600 m. Prerequisite for the awarding of contracts is pre-qualification in compliance with the qualification system (connexio) described here. On the basis of this pre-qualification, suitable suppliers of the products and/or services named in section II. no. 4 can be identified and after additional qualifications have been checked, are requested to submit a tender. In order for pre-qualified bidders to be eligible to continue to stage 2 of the qualification system, potential bidders must complete the pre-qualification (stage 1) via connexio by 27.5.2011. If pre-qualification (stage 1) is not completed by the deadline set by the buyer, then the company will not be considered for the order/orders based on this qualification system. The successful bidder must ensure that their pre-qualification with connexio in the relevant supplier category remains valid for the entire term of the contract. The qualification system is based on the online supplier information system connexio which is operated by Achilles Information GmbH on behalf of utilities (energy and water) in Western, Eastern and Central Europe. During the pre-qualification process via connexio (stage 1), potential or current suppliers of utility companies provide those utility companies connected to the system with information about their business operations by filling in, saving and submitting an online supplier questionnaire (supplier self-disclosure), which can be called up under www.achilles.com/germany, as well as furnishing them with all requisite documents and certificates. Achilles verifies the data provided by the suppliers for completeness, consistency and compliance with the requirements using a formal programme routine, as well as sometimes checking correctness of content (pre-qualification stage 1). The information to be provided for pre-qualification is contained in a document that can be found on www.achilles.com/germany. The participating utility companies reserve the right to adapt or change the criteria occasionally. The participating utility companies have access to a password-protected website 24 hours a day, 365 days a year where they can find the supplier data collected and verified by Achilles. CPV: 76211000. ...
PL-Warsaw: storage tanks
Connexio. Marathon Petroleum Poland Services Sp. z o.o. would like to inform you of a qualification system. The main purpose is in connection with the following measure: Water Storage/Frac Tanks. Please provide rental vessels/tankage for Marathon's upcoming drilling and completion program. Vendor will be responsible for transporting, installing, maintaining the integrity of water storage vessels and disassembly at conclusion of well test program. Expected duration will be 60 days on a per well for a minimum 4 well program. Vessel/tankage will need to be portable. Expected volume of per well site 6 000 cubic meters. Prerequisite for the awarding of contracts is pre-qualification in compliance with the qualification system (connexio) described here. On the basis of this pre-qualification, suitable suppliers of the products and/or services named in Section II. No. 4 can be identified and after additional qualifications have been checked, are requested to submit a tender. In order for pre-qualified bidders to be eligible to continue to stage two of the qualification system, potential bidders must complete the pre-qualification (Stage 1) via connexio by 27th of May 2011. If pre-qualification (Stage 1) is not completed by the deadline set by the buyer, then the company will not be considered for the order/orders based on this qualification system. The successful bidder must ensure that their pre-qualification with connexio in the relevant supplier category remains valid for the entire term of the contract. The qualification system is based on the online supplier information system connexio which is operated by Achilles Information GmbH on behalf of utilities (energy and water) in Western, Eastern and Central Europe. During the pre-qualification process via connexio (Stage 1), potential or current suppliers of utility companies provide those utility companies connected to the system with information about their business operations by filling in, saving and submitting an online supplier questionnaire (supplier self-disclosure), which can be called up under www.achilles.com/germany, as well as furnishing them with all requisite documents and certificates. Achilles verifies the data provided by the suppliers for completeness, consistency and compliance with the requirements using a formal programme routine, as well as sometimes checking correctness of content (Pre-qualification Stage 1). The information to be provided for pre-qualification is contained in a document that can be found on www.achilles.com/germany. The participating utility companies reserve the right to adapt or change the criteria occasionally. The participating utility companies have access to a password-protected website 24 hours a day, 365 days a year where they can find the supplier data collected and verified by Achilles. CPV: 44611400, 44611500, 76460000, 76300000, 76431000. ...
PL-Warsaw: drilling services
Connexio. Marathon Petroleum Poland Services Sp. z o.o. would like to inform you of a qualification system. The main purpose is in connection with the following measure: Composite Mats. Please provide composite mats for Marathon's upcoming drilling and completion program. Vendor will be required to supply composite mats made from high density polyethylene. The mats are required to overlap at seams and lock together to form a continuous surface. Expected qualities are 2 000 square meters. Prerequisite for the awarding of contracts is pre-qualification in compliance with the qualification system (connexio) described here. On the basis of this pre-qualification, suitable suppliers of the products and/or services named in Section II. No. 4 can be identified and after additional qualifications have been checked, are requested to submit a tender. In order for pre-qualified bidders to be eligible to continue to stage two of the qualification system, potential bidders must complete the pre-qualification (Stage 1) via connexio by 27.5.2011. If pre-qualification (Stage 1) is not completed by the deadline set by the buyer, then the company will not be considered for the order/orders based on this qualification system. The successful bidder must ensure that their pre-qualification with connexio in the relevant supplier category remains valid for the entire term of the contract. The qualification system is based on the online supplier information system connexio which is operated by Achilles Information GmbH on behalf of utilities (energy and water) in Western, Eastern and Central Europe. During the pre-qualification process via connexio (Stage 1), potential or current suppliers of utility companies provide those utility companies connected to the system with information about their business operations by filling in, saving and submitting an online supplier questionnaire (supplier self-disclosure), which can be called up under www.achilles.com/germany, as well as furnishing them with all requisite documents and certificates. Achilles verifies the data provided by the suppliers for completeness, consistency and compliance with the requirements using a formal programme routine, as well as sometimes checking correctness of content (Pre-qualification Stage 1). The information to be provided for pre-qualification is contained in a document that can be found on www.achilles.com/germany. The participating utility companies reserve the right to adapt or change the criteria occasionally. The participating utility companies have access to a password-protected website 24 hours a day, 365 days a year where they can find the supplier data collected and verified by Achilles. CPV: 76300000, 76431000. ...
PL-Warsaw: noise fence
Connexio. Marathon Petroleum Poland Services Sp. z o.o. would like to inform you of a qualification system. The main purpose is in connection with the following measure: Noise Barrier Wall. Please provide a rental noise barrier wall for Marathon's upcoming drilling and completion program. Vendor will be responsible for transporting, installing, maintaining the integrity of the wall and disassembly at conclusion of program. Expected duration will be 60 days on a per well for a minimum 4 wells. Noise barrier wall will need to be minimum 10 meters tall and provide a 20 Dba reduction. The wall will need to be portable, quick and easily assembled, and self supporting. Expected length per well site - 150 linear meters. Prerequisite for the awarding of contracts is pre-qualification in compliance with the qualification system (connexio) described here. On the basis of this pre-qualification, suitable suppliers of the products and/or services named in Section II. No. 4 can be identified and after additional qualifications have been checked, are requested to submit a tender. In order for pre-qualified bidders to be eligible to continue to stage two of the qualification system, potential bidders must complete the pre-qualification (Stage 1) via connexio by 27.5.2011. If pre-qualification (Stage 1) is not completed by the deadline set by the buyer, then the company will not be considered for the order/orders based on this qualification system. The successful bidder must ensure that their pre-qualification with connexio in the relevant supplier category remains valid for the entire term of the contract. The qualification system is based on the online supplier information system connexio which is operated by Achilles Information GmbH on behalf of utilities (energy and water) in Western, Eastern and Central Europe. During the pre-qualification process via connexio (Stage 1), potential or current suppliers of utility companies provide those utility companies connected to the system with information about their business operations by filling in, saving and submitting an online supplier questionnaire (supplier self-disclosure), which can be called up under www.achilles.com/germany, as well as furnishing them with all requisite documents and certificates. Achilles verifies the data provided by the suppliers for completeness, consistency and compliance with the requirements using a formal programme routine, as well as sometimes checking correctness of content (Pre-qualification Stage 1). The information to be provided for pre-qualification is contained in a document that can be found on www.achilles.com/germany. The participating utility companies reserve the right to adapt or change the criteria occasionally. The participating utility companies have access to a password-protected website 24 hours a day, 365 days a year where they can find the supplier data collected and verified by Achilles. CPV: 34928230, 76300000, 76431000, 90742100. ...
PL-Warsaw: core drilling
Connexio. Marathon Petroleum Poland Services Sp. z o.o. would like to inform you of a qualification system. The main purpose is in connection with the following measure: Coring. Provide coring services for Marathon's upcoming drilling program. Vendor will be responsible for providing equipment, personnel, and technical support for drilling and retrieving rock cores in the silurian formation. Below is a brief description of the different types of wells to be drilled as part of the company's drilling campaign. Note: the below is basic well data and will be subject to change. Vertical well type 1. Basic well data. — Drill depth range 1 400 m – 2 700 m TVD, — 13-3/8" 54.5 lb/ft surface casing to range ~300 m-1 000 m, — 9-5/8" 40 lb/ft casing to range ~900 m – 1 800 m, — Nominal 8-1/2" hole to TD, — Wells will be wireline logged, possible coring, — On completion of successful evaluation program, 5-1/2" 23 lb/ft casing to TD. Vertical well type 2. Basic well data. — Drill depth range 2 400 m – 4 700 m TVD, — 16" 55 lb/ft surface casing to range ~300 m-1 000 m, — 10-3/4" 55 lb/ft casing to range ~2 000 m – 2 900 m, — 7-5/8" 39 lb/ft casing to range ~2 500 m – 3 500 m, — Nominal 6-1/2" hole to TD, — Wells will be wireline logged, possible coring, — On completion of successful evaluation program, 4-1/2" 15 lb/ft casing to TD. Horizontal well type 1. Basic well data. — Drill depth range 2 400 m – 4 500 m MD, — 20" 106.5 lb/ft surface casing to range ~300 m-1 000 m, — 13-3/8" 68 lb/ft casing to range ~900 m – 2 400 m, — 9-5/8" 53.5 lb/ft casing to range ~1 400 m – 2 600 m, — Nominal 8-1/2" hole to TD, — Wells will be wireline logged, possible coring, — On completion of successful evaluation program, 5-1/2" 23 lb/ft casing to TD, Horizontal well type 2. Basic well data. — Drill depth range 4 400 m – 5 700 m MD, — 20" 106.5 lb/ft surface casing to range ~300 m-1 000 m, — 13-3/8" 68 lb/ft casing to range ~2 000 m – 2 900 m, — 9-5/8" 53.5 lb/ft casing to range ~2 500 m – 3 500 m, — 7-5/8" 39 lb/ft casing to range ~2 900 m – 4 000 m, — Nominal 6-1/2" hole to TD, — Wells will be wireline logged, possible coring, — On completion of successful evaluation program, 4-1/2" 15 lb/ft casing to TD. Prerequisite for the awarding of contracts is pre-qualification in compliance with the qualification system (connexio) described here. On the basis of this pre-qualification, suitable suppliers of the products and/or services named in Section II. No. 4 can be identified and after additional qualifications have been checked, are requested to submit a tender. In order for pre-qualified bidders to be eligible to continue to stage 2 of the qualification system, potential bidders must complete the pre-qualification (stage 1) via connexio by 27.5.2011. If pre-qualification (stage 1) is not completed by the deadline set by the buyer, then the company will not be considered for the order/orders based on this qualification system. The successful bidder must ensure that their pre-qualification with connexio in the relevant supplier category remains valid for the entire term of the contract. The qualification system is based on the online supplier information system connexio which is operated by Achilles Information GmbH on behalf of utilities (energy and water) in Western, Eastern and Central Europe. During the pre-qualification process via connexio (stage 1), potential or current suppliers of utility companies provide those utility companies connected to the system with information about their business operations by filling in, saving and submitting an online supplier questionnaire (supplier self-disclosure), which can be called up under www.achilles.com/germany, as well as furnishing them with all requisite documents and certificates. Achilles verifies the data provided by the suppliers for completeness, consistency and compliance with the requirements using a formal programme routine, as well as sometimes checking correctness of content (Pre-qualification Stage 1). The information to be provided for pre-qualification is contained in a document that can be found on www.achilles.com/germany. The participating utility companies reserve the right to adapt or change the criteria occasionally. The participating utility companies have access to a password-protected website 24 hours a day, 365 days a year where they can find the supplier data collected and verified by Achilles. CPV: 76340000. ...
DK-Copenhagen: well-support services
Civil Works for the exploration well Felsted-1, 1/05 License. PGNiG intends to establish an exploration well named Felsted-1. By contractual agreement contractor (tenderer) is to construct the site necessary for carrying out the exploration and comprise supplying attached services and technical support and personnel on demand during planning, establishing, operation and restoring of the site. CPV: 76460000. ...
UK-Birmingham: customer Relation Management software package
Supply, Installation and maintenance of a customer relations system. London Midland has a franchise obligation with the DfT to provide a dedicated customer contact centre. The existing customer relations department uses an old version of a case management system which uses a basic workflow to manage all of its customer-related business. London Midland require a new / updated system to remove the manual based processing that is evident in the customer relations department to meet the future needs of the business. Ongoing support and maintenance will also be required for the duration of the project. CPV: 48445000, 72253200. ...
No comments:
Post a Comment