UK-Welwyn Garden City: diagnostics and radiodiagnostic devices and supplies
Radiotherapy fully managed cancer treatment service. The contracting authority is seeking to select a service partner for a managed radiotherapy service. The contract is expected to be let for a minimum term of 15 years) following the date on which the installation of the equipment and associated works are projected to be completed and the projected date of handover, with an option for the contracting authority to extend the contract by a further 7 years. The selected supplier will be expected to provide managed equipment services to include the provision, installation, commissioning, maintenance, user training, upgrading, disposal and replacement of equipment for radiotherapy treatment. The equipment will include linear accelerators, simulators, CT simulators, Treatment planning Systems, brachytherapy systems, MRI unit and gamma camera. Suppliers must either provide a managed service with scalable flexibility and the capacity to work with third party suppliers or be able to work within a separate managed service. Expressions of interest are invited from parties able to supply a complete solution for the service/equipment required. The supplier will also need to be able to extend this contract to include possible future satellite radiotherapy services on another site which will be managed by the contracting authority. The selected supplier will be expected to ensure continuity of supplies and services to the Mount Vernon and the Lister Hospital, whether by utilising temporary equipment (which the selected supplier will be expected to bring in and install) or otherwise, during the installation of new equipment and transfer to the new services. Any resultant contract may include future satellite radiotherapy services at another site but managed through MVCC. The selected supplier will be expected to work with the contracting authority in maximising any grant or other funding made available by the Department of Health or from other sources, which may be available to fund (or part-fund) the scheme. The selected supplier must, in delivering the managed services, be able to deliver and guarantee savings to the contracting authority over the lifetime of the contract. The selected supplier will be expected to tailor its proposals and services to produce the best savings and performance mix for the contracting authority. The entire project is to be repaid through guaranteed performance savings, with significant risk transfer. The selected supplier will be expected to provide operational and maintenance support for the equipment as well as continuing items of equipment, the details of which will be set out in the memorandum of information. This will be extended to cover additional operation and maintenance of existing equipment and may include building/facilities works. The selected supplier will be required to demonstrate considerable expertise and experience of operating and maintaining over a considerable number of years. Where not funded by NHS or similar grant or other funding, the contracting authority would prefer the project (under UK accounting standards applicable at the date of publication of this notice) to be off the balance sheet of the contracting authority. Candidates will be expected to work with the contracting authority to make the case for this under the relevant accounting reporting standards. Furthermore, the contracting authority requires the contract to be a service contract, optimised to ensure maximum VAT recovery. The selected supplier is expected to apply for enhanced capital allowances and apply savings to reducing project costs. The selected supplier will be expected to work with the contracting authority to deliver a business case that indicates a reduction of cost and the generation of savings. The contract (and the associated charging and risk transfer structure) will be based on the Department of Health standard form project agreement (version 3, as amended and updated), which (with the exception of the standard form payment mechanism to that project agreement) will form the basis of the project agreement for the scheme, ensuring sufficient risk transfer to the selected supplier to satisfy the contracting authority's commercial business case. Performance of the service will be monitored and results linked to the payment mechanism. The contracting authority is keen to ensure that candidates have the proven project management and technical/engineering expertise and experience to deliver a project of this complexity. In particular, the selected supplier will be expected to demonstrate expertise and experience of designing, financing, installing, operating and maintaining equipment for the on-site service. To this end, the contracting authority may accept a consortium proposal if required in order to ensure the correct skill and experience mix. CPV: 33124000, 33150000, 50400000, 50421000, 50420000. ...
UK-Cardiff: railway and tramway locomotives and rolling stock and associated parts
Rolling Stock and Repair & Maintenance and Finance. The contracting authority intends to set up a comprehensive qualification system which will comprise of three (3) lots. Applicants can tender for all, one or two of these lots - further details will be set out in the pre-qualification questionnaire (see Section III.1.1). Lot 1 - Supply of passenger rail rolling stock; Lot 2 - Repair and maintenance of passenger rolling stock; Lot 3 - Funding and/or leasing of passenger rail rolling stock. CPV: 34600000, 34620000, 50222000, 66114000, 34622000. ...
UK-Belfast: pension services
C434 - third party pension administrators. This tender is intended to award a contract to a 3rd party pension administrator, providing an end to end service for all aspects of pension administration, reporting to the Board of Trustees of the NI Water Pensions Trust Company Ltd. CPV: 66520000. ...
UK-Croydon: petroleum products, fuel, electricity and other sources of energy
Supply of 26 Gas and 32 NHH electricity contracts. Supply of 26 small gas supplies and contracts and 32 NHH electricity supply contracts to various locations throughout the UKD2 area. Note: to register your interest in this notice and obtain any additional information please visit the myTenders Web Site at http://www.myTenders.org/Search/Search_Switch.aspx?ID=81199. CPV: 09000000. ...
F-Montrouge: overhead travelling cranes
One contract per lot: 1) UK 2671 (UK lot): Studies, supply, manufacturing, transport, erection and commissioning of about 42 cranes, 116 jibs (+4 in option), 8 hoists and 10 lift tables for Hinckley point, Somerset, England; 2) PE 2671 (French lot): Studies, supply, manufacturing, transport, erection and commissioning of about 22 cranes, 56 jibs (+4 in option), 4 hoists and 5 lift tables for Penly, Northern of France. The works currently identified include design, manufacturing, on-site transportation and related services of other handling devices. The scope of works for the proposed contract includes: studies, supply, manufacture, erection, controls, factory tests, on site testings and commisionning for these equipments. CPV: 42414200. ...
F-Paris: machinery for the production and use of mechanical power
2 lots: 1) UK 2221: equipment hatch for hinkley point (England) new nuclear power plant (twin-reactor site): 2 equipment hatches for 2 units. 2) PE 2221: equipment hatch for Penly (France) new nuclear power plant (single reactor site): 1 equipment hatch for 1 unit. The scope of works for the proposed contracts includes: 1) UK 2221: studies, supply, qualification, manufacturing, and associated controls, delivery, erection, commissioning and on-site testing for 2 equipment hatches for 2 units at Hinkley point new nuclear power plant (twin-reactor site) 2) PE 2221: studies, supply, qualification, manufacturing, and associated controls, delivery, erection, commissioning and on-site testing for 1 equipment hatch for Penly 3 new nuclear power plant (single reactor site) The equipment hatch is lined with a steel sleeve, which is closed by a large removable metallic cap, and fitted inside of the internal HR containment. It allows accesses of heavy pieces of equipment during construction stages. Further information and details are filled in the appendix A of the PQQ. CPV: 42100000. ...
F-Paris: machinery for the production and use of mechanical power
2 lots: 1) UK 2211: HR airlocks for hinkley point (England) new nuclear power plant (twin-reactor site): 2 HR airlocks (personnal and emergency exit) for 1 unit. Total: 4 airlocks for 2 units. 2) PE 2211: HR airlocks for Penly (France) new nuclear power plant (single reactor site): 2 airlocks (personnal and emergency exit) for 1 unit. The scope of works for the proposed contracts includes: 1) UK 2211: studies, supply, qualification, manufacturing, and associated controls, delivery, erection, commissioning and on-site testing for 4 airlocks for 2 units at Hinkley point new nuclear power plant (twin-reactor site) (2 airlocks per unit) 2) PE 2211: studies, supply, qualification, manufacturing, and associated controls, delivery, erection, commissioning and on-site testing for 2 airlocks for Penly 3 new nuclear power plant (single reactor site) EPR HR airlocks are used for the traffic of the personnel as well as small equipments, whatever the state of the nuclear power pant, without affecting the containment of the enclosure. The personal HR airlock is erected in the reactor building at level +1,5m, the emergency exit HR airlock at level +19,5m. Both airlocks are identical. They are part of the third containment barrier. Further information and details are filled in the appendix A of PQQ. CPV: 42100000. ...
I-Milan: turbo-compressors
Manufacture, test and supply gas turbine packages complete with centrifugal compressor and ancillary systems for high pressure natural gas transportation. Manufacture and supply of 3 nos. aeroderivative gas turbines with an ISO power in the range of 32-37 MW complete with the driven centrifugal compressor package and ancillary systems for high pressure natural gas pipeline transmission. The compressor shall be double section barrel type with suction/discharge pressure of 43/169 bar and an actual suction capacity of 11 000 m3/hr. The molecular weight of the natural gas is 18.8 without H2S presence. The dew point is -20 °C. CPV: 42123500. ...
SE-Gothenburg: compressors
HP Biogas compressor stations. Complete delivery of compressor stations for biogas. The compressor will fill the gas bottles for further distribution to vehicles filling stations. CPV: 42123000. ...
UK-London: printed matter and related products
Publishing of London Underground Staff Magazines. The provision of design, production, distribution and creative development of LUL's staff magazines. CPV: 22000000, 22213000. ...
No comments:
Post a Comment